< Назад | Содержимое | Далее >
Maintenance and Lubrication - Volt
SPECIFICATIONS
APPROXIMATE FLUID CAPACITIES
|
Maintenance Procedure |
Link |
|
Hydraulic Brake System Capacities |
Approximate Fluid Capacities |
|
Engine Heating and Cooling Capacities |
Approximate Fluid Capacities |
|
HVAC Capacities |
Approximate Fluid Capacities |
|
Hybrid/EV System Heating and Cooling |
Approximate Fluid Capacities |
|
Engine Controls and Fuel Capacities - 1.5L (L3A) |
Approximate Fluid Capacities |
|
Engine Mechanical - 1.5L (L3A) |
Approximate Fluid Capacities |
|
Automatic Transmission Fluid Capacities - 5ET50 (MKV) |
Approximate Fluid Capacities |
FLUID AND LUBRICANT RECOMMENDATIONS
|
Usage |
Fluid/Lubricant |
|
Engine Oil |
Use only engine oil licensed to the dexos1 specfication, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. Use SAE 5W-20 viscosity grade engine oil. Cold Temperature Operation: In an area of extreme cold, where the temperature falls below -29 °C (-20 °F), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, always select an oil of the correct specification. Refer to Owner's Manual for more information. |
|
Engine Coolant |
DEX-COOL® (Premix 50/50 with deionized water) |
|
High Voltage Battery Cooling System |
Premix DEX-COOL |
|
Power Electronics Cooling System |
Premix DEX-COOL |
|
Hydraulic Brake System |
DOT 3 Hydraulic Brake Fluid |
|
Windshield Washer |
Automotive windshield washer fluid that meets regional freeze protection requirements. |
|
Electric Drive Unit |
DEXRON®-VI Automatic Transmission Fluid |
|
Key Lock Cylinders |
Multi-Purpose Lubricant, Superlube |
|
Hood, Hatch, and Rear Folding Seat Hinges |
Multi-Purpose Lubricant, Superlube |
|
Weatherstrip Conditioning |
Weatherstrip Lubricant or Dielectric Silicone Grease |
MAINTENANCE ITEMS
|
Maintenance Procedure |
Link |
|
Approximate Fluid Capacities |
Approximate Fluid Capacities |
|
Fluid and Lubricant Recommendations |
Fluid and Lubricant Recommendations |
|
Maintenance Replacement Parts |
Maintenance Replacement Parts |
|
GM Oil Life System Resetting |
GM Oil Life System ResettingGM Oil Life System Resetting (With Scan Tool) |
|
Tire Pressure Indicator Sensor Learn |
Tire Pressure Indicator Sensor Learn |
|
Passenger Compartment Air Filter Replacement |
Passenger Compartment Air Filter Replacement |
|
Brake Pad Inspection |
Brake Pad Inspection |
|
Cooling System Draining and Filling |
Cooling System Draining and Filling |
|
Air Cleaner Element Replacement - 1.5L (L3A) |
Air Cleaner Element Replacement - 1.5L (L3A) |
|
Spark Plug Replacement - 1.5L (L3A) |
Spark Plug Replacement - 1.5L (L3A) |
|
Automatic Transmission Fluid Drain and Fill - 5ET50 (MKV) |
Transmission Fluid Drain and Fill |
MAINTENANCE REPLACEMENT PARTS
Replacement parts identified below by name, part number, or specification can be obtained from your dealer.
|
Part |
GM Part Number |
ACDelco Part Number |
|
Engine Air Cleaner/Filter |
20871244 |
A3148C |
|
Cabin Air Filter |
13508023 |
CF185 |
|
Engine Oil Filter |
12670058 |
UPF64R |
|
Spark Plugs |
12637197 |
41-124 |
|
Wiper Blades |
||
|
|
23251330 |
- |
|
|
23251332 |
- |
MAINTENANCE
MAINTENANCE SCHEDULE
The Maintenance Schedule information will only be found in the Owner's Manual.
Refer to the Maintenance Schedule subsection of the Owner's Manual, or you may be able to use the Search information function using the words Scheduled Maintenance.
GM OIL LIFE SYSTEM RESETTING
This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which includes engine revolutions and engine temperature, and miles driven. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed.
When the system has calculated that oil life has been diminished, it indicates that an oil change is necessary. A CHANGE ENGINE OIL SOON message comes on. Change the oil as soon as possible within the next 1 000 km (600 miles). It is possible that, if driving under the best conditions, the oil life system might indicate that an oil change is not necessary for up to two years. The engine oil and filter must be changed at least once every two years and, at this time, the system must be reset. Your dealer has trained service people who will perform this work using genuine parts and reset the system. It is also important to check the oil regularly over the course of an oil drain interval and keep it at the proper level.
If the system is ever reset accidentally, the oil must be changed at 5 000 km (3, 000 miles) since the last oil change. Remember to reset the oil life system whenever the oil is changed.
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil change is changed so that the system can calculate the next engine oil change. To reset the system:
1. Use the SELECT knob to select OIL LIFE on the DIC menu.
2. Press SELECT to start the OIL LIFE reset procedure.
3. The DIC menu will display "Are you sure that you want to reset?" Use SELECT to choose YES to reset oil life or NO to exit and return to the previous menu.
4. If YES is selected, the DIC menu will display RESET OIL LIFE for a short time and then 100% OIL LIFE will be display when OIL LIFE is successfully reset.
If the Change Engine Oil Soon message comes back on when the vehicle is started, the engine oil life system has not reset. Repeat the procedure.
GM OIL LIFE SYSTEM RESETTING (WITH SCAN TOOL)
When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A ENGINE OIL light message will come on. Change the engine oil as soon as possible within the next 600 miles (1 000 km). It is possible that, if driving under the best conditions, the oil life system may not indicate that an oil change is necessary for over a year. However, the engine oil and filter must be changed at least once a year and at this time the system must be reset.
(If applicable)With Scan Tool
1. Ignition - On / Vehicle - In Service Mode
2. Select:Module Diagnostics
3. Select:K20 Engine Control Module
4. Select:Configuration/Reset Functions
5. Select:Reset Functions
6. Select:Engine Oil Life Reset
7. Enter the desired value
8. Select:Continue
